Struct gluon_vm::thread::HookFlags

source ·
pub struct HookFlags { /* private fields */ }

Implementations§

source§

impl HookFlags

source

pub const LINE_FLAG: Self = _

Call the hook when execution moves to a new line

source

pub const CALL_FLAG: Self = _

Call the hook when a function is called

source

pub const fn empty() -> Self

Returns an empty set of flags.

source

pub const fn all() -> Self

Returns the set containing all flags.

source

pub const fn bits(&self) -> u8

Returns the raw value of the flags currently stored.

source

pub const fn from_bits(bits: u8) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

source

pub const fn from_bits_truncate(bits: u8) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

source

pub const unsafe fn from_bits_unchecked(bits: u8) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

source

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

source

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

source

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

source

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

source

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

source

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

source

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

source

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

source

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

source

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

source

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

source

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

source

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations§

source§

impl Binary for HookFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl BitAnd for HookFlags

source§

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

§

type Output = HookFlags

The resulting type after applying the & operator.
source§

impl BitAndAssign for HookFlags

source§

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

source§

impl BitOr for HookFlags

source§

fn bitor(self, other: HookFlags) -> Self

Returns the union of the two sets of flags.

§

type Output = HookFlags

The resulting type after applying the | operator.
source§

impl BitOrAssign for HookFlags

source§

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

source§

impl BitXor for HookFlags

source§

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

§

type Output = HookFlags

The resulting type after applying the ^ operator.
source§

impl BitXorAssign for HookFlags

source§

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

source§

impl Clone for HookFlags

source§

fn clone(&self) -> HookFlags

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for HookFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for HookFlags

source§

fn default() -> HookFlags

Returns the “default value” for a type. Read more
source§

impl Extend<HookFlags> for HookFlags

source§

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator. Read more
source§

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)
Extends a collection with exactly one element.
source§

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)
Reserves capacity in a collection for the given number of additional elements. Read more
source§

impl FromIterator<HookFlags> for HookFlags

source§

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator. Read more
source§

impl Hash for HookFlags

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl LowerHex for HookFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Not for HookFlags

source§

fn not(self) -> Self

Returns the complement of this set of flags.

§

type Output = HookFlags

The resulting type after applying the ! operator.
source§

impl Octal for HookFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Ord for HookFlags

source§

fn cmp(&self, other: &HookFlags) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for HookFlags

source§

fn eq(&self, other: &HookFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for HookFlags

source§

fn partial_cmp(&self, other: &HookFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Sub for HookFlags

source§

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

§

type Output = HookFlags

The resulting type after applying the - operator.
source§

impl SubAssign for HookFlags

source§

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

source§

impl UpperHex for HookFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Copy for HookFlags

source§

impl Eq for HookFlags

source§

impl StructuralEq for HookFlags

source§

impl StructuralPartialEq for HookFlags

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<Id> AsId<Id> for Id
where Id: ?Sized,

source§

fn as_id(&self) -> &Id

source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CallHasher for T
where T: Hash + ?Sized,

§

fn get_hash<H, B>(value: &H, build_hasher: &B) -> u64
where H: Hash + ?Sized, B: BuildHasher,

§

impl<Q, K> Comparable<K> for Q
where Q: Ord + ?Sized, K: Borrow<Q> + ?Sized,

§

fn compare(&self, key: &K) -> Ordering

Compare self to key and return their ordering.
§

impl<Choices> CoproductSubsetter<CNil, HNil> for Choices

§

type Remainder = Choices

§

fn subset( self ) -> Result<CNil, <Choices as CoproductSubsetter<CNil, HNil>>::Remainder>

Extract a subset of the possible types in a coproduct (or get the remaining possibilities) Read more
§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastArc for T
where T: Downcast + Send + Sync,

source§

fn into_arc_any(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<D, T> FromPtr<D> for T

source§

unsafe fn make_ptr(_: D, ptr: *mut ()) -> *mut T

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T, U, I> LiftInto<U, I> for T
where U: LiftFrom<T, I>,

§

fn lift_into(self) -> U

Performs the indexed conversion.
§

impl<Source> Sculptor<HNil, HNil> for Source

§

type Remainder = Source

§

fn sculpt(self) -> (HNil, <Source as Sculptor<HNil, HNil>>::Remainder)

Consumes the current HList and returns an HList with the requested shape. Read more
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> Any for T
where T: Any,

source§

impl<T> Captures<'_> for T

§

impl<T> CloneAny for T
where T: Any + Clone,

source§

impl<N> NodeTrait for N
where N: Copy + Ord + Hash,